1. Set according bicycle tire circumference.
2. Instantaneous vehicle speed SPD
3. The maximum driving speed MXS
4. The average driving speed AVS
5. And average speed comparison prompt Function wheel revolutions
6. Every minute wheel running laps R
Mileage function (inch / metric switching)
7. Driving total mileage ODO
8. DST single Mileage
9. Total mileage initial set value, if the replacement battery, you can change before the value set as the initial value.
10. Long TM while driving
11. Clock (12 hours / 24 hours switching) CLK
Automatic cycle display
12. ODO, DST, MXS, AVS, TM, R, CLK function every 4 seconds to automatically scroll the contents of a display SCAN
Traffic data sampling function
13. Real-time data sampling, professional testing, containing DST TM AVS MXS
Power saving function
There is no input signal within 14.30 seconds, automatically enter power-saving mode, only the time.
Fifteen. When the total mileage reaches the set value of maintenance, the wrench symbol to remind maintenance bike.
16. It has a good waterproof function.
1, the seat is mounted to the handlebar header;
2, the AG13 button battery into the battery slot on the back of the head table
3, the initialization code table data, generally only need to set the tire circumference of a parameter can be used normally;
3, Block header header insertion chute;
4, the sensor is mounted to the front fork, the sensor head is on the part of the spokes;
5, sensor magnet mounted on the spokes aligned with the sensor head apart about 1-2mm;
6, fixed cable with nylon tie;
7, check the above header blocks, sensors and sensor magnet is installed sturdy. The package with the necessary rubber
gaskets and detailed instructions in English, to ensure that your installation was successful.
8, more features, please refer to the manual settings
1, the battery installed and the battery compartment on the back of the head table;
2, within 15 seconds press the right to enter the tire circumference setting;
3, see the wheel diameter and circumference table, such as 28 models wheel circumference 224cm, press the left button three
will set the value to 224 (the machine is preset to 206cm)
5, more features, please refer to the manual settings.